The Elstead Medstead exterior flush PIR wall lantern in black finish and rated IP43 is traditional, with three clear glass panels and built-in motion detector.
This traditional lantern shaped cast aluminium exterior wall light is shown with a reproduction Edison period light bulb to complete the antique look. These light bulbs are available to purchase separately from our website.
PIR Technical information:
- 150w switching capacity.
- PIR range: minimum. 1m to 8m max.
- Time adjustment 5 seconds to 7 minutes.
- Detection width: 120 degrees.
Please note: The sensor cannot be manually over ridden. The final PIR settings must be set at dusk as the PIR does not operate in daylight. Supplied with a manufacturer five year anti corrosion warranty and two year sensor warranty.
Exterior fittings must have an IP (Ingress Protection) rating which indicates the fittings ability to prevent solids and liquids penetrating the enclosure. The higher the number, the greater the protection. The minimum rating for an outside light exposed to the weather is IP23. This fitting is rated IP43.
There is a matching half wall lantern in the Medstead outdoor range; please see below.
This outside light is supplied by Elstead Lighting, a British company that specialise in the manufacture and distribution of quality decorative lighting such as the Medstead exterior flush PIR wall lantern in black finish and rated IP43 you see here.
|Fitting Height (mm)||
1 x 100w or 12w LED
ES – E27
|Compatible With LED Bulbs||
|Lamp bulb included||
PIR sensor & photocell
Class 1: Requires an earth